courses

0085

Skip to content | Change text size
 

print version

Monash University Handbook 2011 Undergraduate - Course

This course entry should be read in conjunction with information provided in the 'Faculty information' section of this Handbook by the Faculty of Engineering

Managing facultyEngineering
Abbreviated titleBSc/BE
CRICOS code017107E
Total credit points required240
Standard duration of study (years)5 years FT, 10 years PT
Study mode and locationOn-campus (Clayton)
Admission, fee and application details http://www.monash.edu/study/coursefinder/course/0085
Contact details

Telephone +61 3 9905 3404, email eng.info@eng.monash.edu.au or visit http://www.eng.monash.edu.au

Course coordinator

Visit http://www.eng.monash.edu.au/current-students/course-information.html#1

Description

This program provides an opportunity to combine studies in many areas of science with a specialisation in one of the following branches of engineering: chemical engineering, civil engineering, electrical and computer systems engineering, materials engineering and mechanical engineering.

Objectives

This course enables students to complement studies in one of five branches of engineering by selecting units from the very wide range of disciplines offered by the Faculty of Science.

Vacation work/industrial experience

In order to fulfil the requirements of the various degree regulations and Engineers Australia, all engineering students must complete 12 weeks of approved engineering work experience and submit a report on that work. Such work is normally undertaken in the vacations between second and third years and/or between third and fourth years (but may also be taken between first and second years). Students who have completed all academic requirements for their degrees are not eligible to graduate until this work experience has been completed and a satisfactory report submitted.

Professional recognition

For information about professional recognition of Faculty of Engineering courses visit http://www.monash.edu.au/pubs/2011handbooks/undergrad/eng-03.html

Structure

The first two semesters of the course are largely common to all branches of engineering studies, with all students studying mathematics, some engineering units and either chemistry or physics. Normally students must identify which branch of engineering they plan to study at the commencement of stage one, but those who are unsure of which branch to pursue are advised to consider enrolling in CHM1011, MTH1030 (or MTH1020) and PHS1011 (or PHS1080) and either ENG1060 or an engineering unit in a branch of interest in their first semester, and to consult the academic adviser prior to second semester for further unit selection.

The large majority of students entering the faculty have completed the Victorian Certificate of Education (VCE), and references in the following paragraphs are to the prerequisite VCE subjects. Some domestic and international students enter the faculty with equivalent qualifications, and advice about unit choice for students with qualifications other than the VCE may be obtained from the faculty administration offices. Selected units are specified for students who have not completed appropriate VCE studies.

Students with a strong mathematics background and a keen interest in the subject could replace the units MTH1030 and MTH2010 with their advanced versions MTH1035 and MTH2015 respectively. Enrolment in these units is with permission from the head of the School of Mathematics.

Core studies

Students must complete major and minor sequences towards the science component of this double-degree. Students in all engineering branches may pursue a science major sequence in:

  • astrophysics
  • mathematics and statistics
  • physics
  • computer science

Refer to each stream for more specific information.

In order to pursue a particular sequence, students must take the necessary science prerequisites in their first stage of study. For details of major and minor sequences in science disciplines refer to the 'Science areas of studies and sequences - Clayton' in the Faculty of Science section of this handbook at http://www.monash.edu.au/pubs/2011handbooks/undergrad/sci-aos-clayton.html.

Students should contact the appropriate science or engineering course adviser before enrolling in any level of the double degree program, to ensure that the program they wish to follow will satisfy prerequisites necessary for higher stages. In some special cases, students may choose to overload at stages two or three if they have not completed all of the prerequisites for their chosen science major sequences.

In this double degree course structure, restrictions have been imposed in terms of prescribed units to ensure that students pursue studies that suitably equip them for the subsequent levels in science and engineering.

The award of an honours degree in engineering is based on academic achievement.

Requirements

Students must complete units as listed for each stream and sequence below.

The choice of either MTH1020 and MTH1030 or MTH1030 and MTH2010 at stage one is determined by the level of preparation from VCE studies, and students who have not completed year 12 physics should take PHS1080 rather than PHS1011.

Depending on the engineering stream, students in the double-degree must complete two major sequences in different science disciplines, or a double major and a minor sequence in a different science discipline, or a major and three minor sequences.

Chemical engineering

The engineering component requires not less than 132 points that must be obtained in units prescribed by this course list, and the science component requires no less than 108 points, including at least 24 points of level three science units.

The science major sequence can be selected from the science areas of study and sequences in this handbook available via http://www.monash.edu.au/pubs/2011handbooks/undergrad/sci-aos-clayton.html.

IMPORTANT NOTE: This is a new course structure for students entering the program from 2011 onwards. Students who entered the program prior to 2011 should refer to the Handbook for the year in which they commenced the course. Archived Handbooks are available at http://www.monash.edu.au/pubs/handbooks/archive.html. Please contact your course adviser if unsure of course progression.

Stage one

All students complete:

Select one pair of mathematics units from:

In addition students complete units in one of the following sequences as outlined below.

Generic sequence

Select one pair of science units from:

  • ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
  • BIO1011 Biology I and BIO1022 Biology II
  • ESC1011 Planet earth and its environment: The cosmic connection and ESC1022 Planet earth: Dynamic systems, environmental change and resources
  • FIT1029 Algorithmic problem solving and FIT1002 Computer programming
  • PHS1011 Physics (or PHS1080 Foundation physics) and PHS1022 Physics
  • STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs

Major sequence in life sciences / Major sequence in chemistry with a minor sequence in life sciences

Stage two

All students complete:

  • CHE2161 Fluid mechanics
  • CHE2162 Material and energy balances
  • CHE2163 Heat and mass transfer
  • CHE2164 Thermodynamics I
  • MTH2021 Linear algebra with applications
  • MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at stage one)

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • an approved 12 point level two science sequence

Major sequence in life sciences

Select one pair of units from:

  • BCH2011 Structure and function of cellular biomolecules and BCH2022 Metabolic basis of human diseases
  • MIC2011 Microbiology: The microbial world and MIC2022 Microbiology: Host and environmental interactions
  • MOL2011 Molecular biology: Genes and their expression and MOL2022 Molecular biology: Gene technology and its application

Major sequence in chemistry with a minor sequence in life sciences

  • an approved 12 point level two science sequence

(Total: 48 points)

Stage three

All students complete:

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • CHE2165 Bio-nano engineering or 6 point chemical engineering elective (if BIO1011 taken at stage one)
  • 24 points of approved science units to complete a major sequence in science

Major sequence in life sciences

  • 6 point approved chemical engineering elective unit
  • 12 points of approved science units towards a major sequence in biochemistry, microbiology or molecular biology
  • 12 points of approved science units to complete a minor sequence in chemistry

Major sequence in chemistry with a minor sequence in life sciences

  • BCH2011 Structure and function of cellular biomolecules
  • BCH2022 Metabolic basis of human diseases
  • 6 point approved chemical engineering unit
  • 12 points of approved science units towards a major sequence in chemistry

(Total: 48 points)

Stage four

All students complete:

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • 6 point approved chemical engineering unit
  • 24 points of approved science units to complete a second major sequence, or a double major sequence in science

Major sequence in life sciences / Major sequence in chemistry with a minor sequence in life sciences

  • CHE3171 Bioprocess technology
  • 12 points of approved science units to complete an additional minor sequence in science

In addition:

  • students studying the major sequence in life sciences select 12 points of approved science units to complete a major sequence in biochemistry, microbiology or molecular biology
  • students studying the major sequence in chemistry with a minor sequence in life sciences select 12 points of approved science units to complete a major sequence in chemistry

(Total: 48 points)

Stage five

All students complete:

  • CHE3167 Transport phenomena and numerical methods
  • CHE4161 Engineers in society
  • CHE4162 Particle technology
  • CHE4170 Design project (12 points)
  • CHE4180 Chemical engineering project (12 points)

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • 6 point approved chemical engineering unit

Major sequence in life sciences / Major sequence in chemistry with a minor sequence in life sciences

(Total: 48 points)

Civil engineering

The engineering component requires not less than 132 points that must be obtained in units prescribed by this course list, and the science component requires no less than 108 points, including at least 24 points of level three science units.

The science major sequence can be selected from the science areas of study and sequences in this handbook available via http://www.monash.edu.au/pubs/2011handbooks/undergrad/sci-aos-clayton.html.

IMPORTANT NOTE: This is a new course structure for students entering the program from 2011 onwards. Students who entered the program prior to 2011 should refer to the Handbook for the year in which they commenced the course. Archived Handbooks are available at http://www.monash.edu.au/pubs/handbooks/archive.html. Please contact your course adviser if unsure of course progression.

Stage one

Select one pair of mathematics units from:

Select one pair of science units from:

  • ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
  • BIO1011 Biology I and BIO1022 Biology II
  • CHM1011 Chemistry and CHM1022 Chemistry
  • ESC1011 Planet earth and its environment: The cosmic connection and ESC1022 Planet earth: Dynamic systems, environmental change and resources
  • FIT1029 Algorithmic problem solving and FIT1002 Computer programming
  • STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs

(Total: 48 points)

Stage two

  • CIV2206 Mechanics of solids
  • CIV2226 Design or concrete and masonry structures
  • CIV2242 Introductory geo engineering
  • ENG1061 Engineering profession
  • MTH2021 Linear algebra with applications
  • MTH2032 Differential equations with modelling
  • 12 points of approved level two science units including MTH2010 if that was not taken at stage one

(Total: 48 points)

Stage three

  • 24 points of approved science units to complete a major sequence in science*

Select 24 points of engineering units from:

  • CIV2207 Computing and water systems modelling
  • CIV2225 Design of steel and timber structures
  • CIV2263 Water systems
  • CIV2282 Transport and traffic engineering
  • CIV3204 Engineering investigation
  • CIV3205 Project management for civil engineers
  • CIV3221 Building structures and technology
  • CIV3222 Bridge design and assessment
  • CIV3247 Geoengineering
  • CIV3248 Groundwater and environmental geoengineering
  • CIV3264 Urban water and waste water systems
  • CIV3283 Road engineering

(Total: 48 points)

Stage four

  • 24 points of CIV units chosen from level three units above
  • 24 points of approved science units to complete a second major sequence, or a double major sequence in science*

(Total: 48 points)

Stage five

  • CIV4210 Project I
  • CIV4212 Civil engineering practice 4
  • 24 points of CIV units chosen from level three units above
  • 12 points of civil engineering electives from the list below

Civil engineering electives

  • CIV3203 Civil engineering construction
  • CIV4211 Project B*
  • CIV4234 Advanced structural analysis
  • CIV4235 Advanced structural design
  • CIV4248 Ground hazards and environmental geotechnics
  • CIV4249 Foundation engineering
  • CIV4261 Integrated urban water management
  • CIV4268 Water resources management
  • CIV4283 Transport planning
  • CIV4284 Transport systems
  • ENG4700 Engineering technology for biomedical imaging and sensing

*Enrolment in this unit is by departmental approval only.

(Total: 48 points)

Electrical and computer systems Engineering

The generic and the computer science streams of the engineering component require not less than 132 points that must be obtained in units prescribed by this course and the science component requires at least 108 points. Students must also complete either two majors or a double major and a minor in different science disciplines. The physiology/biomedical engineering stream requires 156 points of engineering and 84 points of science.

The science major sequence can be selected from the science areas of study and sequences in this handbook available via http://www.monash.edu.au/pubs/2011handbooks/undergrad/sci-aos-clayton.html.

IMPORTANT NOTE: This is a new course structure for students entering the program from 2011 onwards. Students who entered the program prior to 2011 should refer to the Handbook for the year in which they commenced the course. Archived Handbooks are available at http://www.monash.edu.au/pubs/handbooks/archive.html. Please contact your course adviser if unsure of course progression.

Stage one

All students to complete:

Select one pair of mathematics units from:

Select one pair of science units from:

  • ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
  • BIO1011 Biology I and BIO1022 Biology II
  • CHM1011 Chemistry and CHM1022 Chemistry
  • ESC1011 Planet earth and its environment: The cosmic connection, and ESC1022 Planet earth: Dynamic systems, environmental change and resources
  • FIT1029 Algorithmic problem solving and FIT1002 Computer programming
  • STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs

(Total: 48 points)

Stage two

All students complete:

  • ECE2011 Signal processing
  • ECE2072 Digital systems
  • ENG2092 Advanced engineering mathematics B
  • MTH2021 Linear algebra with applications
  • MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at stage one)

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • ECE2071 Computer organisation and programming, or ECE2061 Analogue electronics (if FIT1002/FIT1008 or CSE1301/CSE1303 taken at stage one)
  • PHS2011 Physics: Quantum concepts and technologies
  • PHS2022 Physics for communications and measurement

Computer science sequence

Physiology/biomedical sequence

Select any two units from:

  • PHY2011 Neuroscience of sensation, brain and movement
  • PHY2021 Body systems physiology
  • PHY2032 Physiology of human health

(Total: 48 points)

Stage three

All students complete:

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • ECE2061 Analogue electronics or ECE3073 Computer systems A38(if FIT1002/FIT1008 or CSE1301/CSE1303 taken at stage one)
  • ECE3022 Wireless and guided EM
  • 24 points of approved science units to complete a major sequence in science

Computer science sequence

Physiology/biomedical sequence

Select any four units from:

  • PHY3012 Integrative neuroscience
  • PHY3072 Muscle and exercise
  • PHY3082 Development physiology
  • PHY3111 Sensation and movement
  • PHY3171 Clinical and experimental cardiovascular physiology
  • PHY3181 Sex, reproduction and society

(Total: 48 points)

Stage four

All students complete:

  • ECE3091 Engineering design
  • ECE3092 Systems engineering and reliability analysis

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • ECE3073 Computer systems or one 6-point elective from the ECSE elective units coded ECExxxx (if ECE3073 already taken)
  • 6 point elective from the ECSE elective units coded ECExxxx
  • 24 points of approved science units to complete a second major sequence, or a double major sequence in science

Computer Science sequence

  • ECE3022 Wireless and guided EM
  • ECE3093 Optimisation estimation and numerical methods
  • 24 points of approved science units to complete either a major sequence in mathematics or a double major sequence in computer science

Physiology/biomedical sequence

  • ECE3022 Wireless and guided EM
  • ECE3073 Computer systems or one 6-point elective from the ECSE elective units coded ECExxxx (if ECE3073 already taken)
  • ECE3093 Optimisation estimation and numerical methods
  • 6 point electrical and computer systems engineering elective units coded ECExxxx
  • 12 points of biomedical engineering units from the list below

If a biomedical unit is not offered in a particular semester, then another ECSE elective may be taken subject to head of department approval

(Total: 48 points)

Stage five

All students complete:

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • ECE3093 Optimisation estimation and numerical methods
  • 12 points from the ECSE elective units coded ECExxxx

Computer Science sequence

  • 18 points from the electrical and computer systems engineering elective units coded ECExxxx

Physiology/biomedical sequence

  • 6 points from the electrical and computer systems engineering elective units coded ECExxx
  • 12 points of biomedical engineering units from the list below:

Biomedical engineering electives

  • ECE4081 Medical instrumentation
  • ECE4084 Biomechanics of human musculo-skeletal systems
  • ECE4086 Medical imaging technology
  • ECE4087 Medical technology innovation
  • ENG4700 Engineering technology for biomedical imaging and sensing
  • MTE2548 Biomaterials I
  • MTE4596 Biomaterials II

If a biomedical unit is not offered in a particular semester, then another ECSE elective may be taken subject to head of department approval

(Total: 48 points)

Materials engineering

The generic sequence requires 132 points of engineering and 108 points of science. The materials science sequence requires 108 points of engineering and 132 points of science. Students must also complete either two majors or a double major and a minor in two different science areas of study.

The science major sequence can be selected from the science areas of study and sequences in this handbook available via http://www.monash.edu.au/pubs/2011handbooks/undergrad/sci-aos-clayton.html.

IMPORTANT NOTE: This is a new course structure for students entering the program from 2011 onwards. Students who entered the program prior to 2011 should refer to the Handbook for the year in which they commenced the course. Archived Handbooks are available at http://www.monash.edu.au/pubs/handbooks/archive.html. Please contact your course adviser if unsure of course progression.

Stage one

All students complete:

Select one unit from:

Select one pair of science units from:

Select one pair of mathematics units from:

Select one pair of science units from:

  • ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
  • BIO1011 Biology I and BIO1022 Biology II
  • CHM1011 Chemistry and CHM1022 Chemistry (if this pair has not already been taken)
  • ESC1011 Planet earth and its environment: The cosmic connection and ESC1022 Planet earth: Dynamic systems, environmental change and resources
  • FIT1029 Algorithmic problem solving and FIT1002 Computer programming
  • PHS1011 Physics (or PHS1080 Foundation physics) and PHS1022 Physics (if this pair has not already been taken)
  • STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs

(Total: 48 points)

Stage two

All students complete:

  • MTH2021 Linear algebra with applications
  • MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at stage one)

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • MTE2541 Nanostructure of materials
  • MTE2542 Microstructural development
  • MTE2544 Functional materials
  • MTE2545 Polymers and ceramics I
  • a 12 point level two science sequence

Major sequence in materials science

  • MSC2011 Nanostructure of materials
  • MSC2122 Microstructural development
  • 24 points of level two science units, including MTH2010 (if not taken at stage one)

(Total: 48 points)

Stage three

All students complete:

  • MTE2546 Mechanics of materials
  • MTE2547 Structure-property relationships in materials

Generic sequence

  • MTE3545 Functional materials and devices
  • 6 point level three core unit from the Bachelor Engineering in the field of materials engineering
  • 24 points of approved science units to complete a first major sequence in science*

Major sequence in materials science

  • MTE2545 Polymers and ceramics I
  • 24 points of approved science units to complete a major sequence in science*

Select 6 points towards the materials science major sequence from:

(Total: 48 points)

Stage four

All students complete:

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • MTE3541 Materials durability
  • MTE3542 Microstructural design in structural materials
  • 6 point level three core unit from the Bachelor of Engineering in the field of materials engineering
  • 24 points of approved science units to complete a second major sequence* or a double major sequence in chemistry or mathematics

Major sequence in materials science

  • MTE3543 Microstructure to applications: The mechanics of materials
  • MTE3544 Management and practice in materials engineering
  • MTE3546 Polymers and ceramics II
  • MSC3111 Materials durability
  • MSC3132 Functional materials and devices, or one 6-point elective in materials engineering from the list below

Select 6 points towards the materials science major sequence from:

Plus one of (for which equivalent materials science unit was not taken before):

(Total: 48 points)

Stage five

All students complete:

  • MTE4525 Project I
  • MTE4526 Project II
  • MTE4571 Materials engineering design and practice
  • MTE4572 Polymer/composite processing and engineering
  • MTE4573 Processing and engineering of metals and ceramics

In addition students complete units in their chosen sequence as outlined below.

Generic sequence

  • 12 points of level three materials engineering core units
  • 6 point materials engineering elective

Major sequence in materials science

  • MSC3132 Functional materials and devices (if not already completed) or one 6-point materials engineering elective
  • 12 points of electives in materials engineering (students taking the biomaterials sequence can choose relevant electives and a project)
Materials engineering electives
  • ENG4616 Schools technology project
  • MTE3590/4590 Modelling of materials*
  • MTE3591/4591 Composites, thermosets and elastomers*
  • MTE4592 Advanced ceramics and applications)
  • MTE4593 Materials and the environment**
  • MTE4594 Engineering alloys processing, design and selection**
  • MTE4595 Corrosion - mechanisms and protection methods**
  • MTE4596 Biomaterials*
  • MTE4597 Nanomaterials

(Total: 42 points)

* Offered 2010, 2012.

** Offered 2011.

Mechanical engineering

The engineering component requires not less than 132 points that must be obtained in units prescribed by this course list, and the science component requires at least 108 points.

The science major sequence must be in mathematics with the second major sequence in either physics or astrophysics. Refer to these areas of study via http://www.monash.edu.au/pubs/2011handbooks/undergrad/sci-aos-clayton.html.

IMPORTANT NOTE: This is a new course structure for students entering the program from 2011 onwards. Students who entered the program prior to 2011 should refer to the Handbook for the year in which they commenced the course. Archived Handbooks are available at http://www.monash.edu.au/pubs/handbooks/archive.html. Please contact your course adviser if unsure of course progression.

Stage one

Select one pair of mathematics units from:

Select one pair of science units from:

  • ASP1010 Earth to cosmos - introductory astronomy and ASP1022 Life and the universe
  • BIO1011 Biology I and BIO1022 Biology II
  • CHM1011 Chemistry and CHM1022 Chemistry
  • ESC1011 Planet earth and its environment: The cosmic connection and ESC1022 Planet earth: Dynamic systems, environmental change and resources
  • FIT1029 Algorithmic problem solving and FIT1002 Computer programming
  • STA1010 Statistical methods for science and MTH1112 Numbers, logic and graphs

(Total: 48 points)

Stage two

All students complete:

  • MEC2402 Engineering design I
  • MEC2403 Mechanics of materials
  • MEC2405 Thermodynamics
  • MEC2406 Engineering design II
  • MTH2021 Linear algebra with applications
  • MTH2032 Differential equations with modelling and MTH2010 Multivariable calculus (if not taken at stage one)
  • PHS2011 Physics: Quantum concepts and technologies
  • PHS2022 Physics for communications and measurement

(Total: 48 points)

Stage three

  • MEC2401 Dynamics I
  • MEC2404 Fluid mechanics I
  • MEC2407 Electromechanics
  • 6 points of level three units from Bachelor of Engineering in the field of mechanical engineering
  • 24 points of approved science units to complete a major sequence in mathematics

(Total: 48 points)

Stage four

  • 24 points of level three units from the Bachelor of Engineering in the field of mechanical engineering
  • 24 points of approved science units to complete a second major sequence in science* or a double major sequence in mathematics

(Total: 48 points)

Stage five

  • MEC4401 Final year project
  • MEC4404 Professional practice
  • 18 points of level three units from the Bachelor of Engineering in the field of mechanical engineering

18 points of mechanical engineering electives from the list below

(Total: 48 points)

* Any sequence in science may be taken, provided the appropriate sequence requirements and prerequisites are completed. In some cases, students may elect to seek approval for an overloaded course of up to 12 points at level two or three to enable these requirements to be completed in additional to the required science units at level two.

** Recommended only for students with an aggregate of at least 70 per cent at the conclusion of third year.

*** Enrolment subject to departmental approval.

Progression to further studies

Students may apply for admission to an honours stage in science, following the completion of an approved combination of at least 144 points of units including all of the science requirements for that branch of the Bachelor of Science and Bachelor of Engineering. Students who are considering doing honours in science prior to completing the double-degree should consult with the Faculty of Science regarding their unit selection prior to re-enrolling for stage three.

Alternative exit(s)

Students who wish to graduate with a Bachelor of Science, or undertake honours in science, prior to the completion of the double degree course must have completed at least 144 points of studies including all of the science requirements for that double degree course.

Students may exit from the double-degree program and graduate with the single engineering component providing all requirements for the single engineering degree have been met.

Award(s)

Bachelor of Science

Bachelor of Engineering in the field of Mechatronics Engineering

Bachelor of Engineering in the field of Industrial Engineering and Engineering Management

Bachelor of Engineering in the field of Chemical Engineering

Bachelor of Engineering in the field of Civil Engineering

Bachelor of Engineering in the field of Electrical and Computer Systems

Bachelor of Engineering in the field of Materials Engineering

Bachelor of Engineering in the field of Mechanical Engineering

Bachelor of Engineering (with Honours) in the field of Chemical Engineering

Bachelor of Engineering (with Honours) in the field of Civil Engineering

Bachelor of Engineering (with Honours) in the field of Electrical and Computer Systems

Bachelor of Engineering (with Honours) in the field of Materials Engineering

Bachelor of Engineering (with Honours) in the field of Mechanical Engineering

Bachelor of Engineering (with Honours) in the field of Mechatronics Engineering

Bachelor of Engineering (with Honours) (Industrial Engineering and Engineering Management)

Where more than one award is listed for one or both components of the double degree the actual award(s) conferred may depend on units/majors/streams/specialisations studied, the level of academic merit achieved, or other factors relevant to the individual student's program of study.